Your Cart

e6000 Crystal Clear Adhesive  -  40.2g Bottle with 3 Precision Tips

e6000 Crystal Clear Adhesive - 40.2g Bottle with 3 Precision Tips

e6000 Crystal Clear Adhesive - 40.2g Bottle with 3 Precision Tips

$15.95

description

Bonds Everything so you can Create or Repair Anything!

E6000 is a unique adhesive formulated to meet high-performance industrial-strength requirements for almost any project. Its flexibility and superior bond strength to virtually any substrate make exceptional adhesive for repairs, hobby/craft creations and heavy-duty applications. E6000 remains extremely flexible in all types of weather conditions and uses - even in applications where heavy vibrations may occur.

E6000 is a great solution for cosplay, ideal for bonding gems, rhinestones, trims and other detailing to almost any base. 

 E600 also can be peeled off of hard, smooth surfaces. Ideal when you want a permanent, yet potentially removable bond later on down the line. Such as attaching external components to drones.

Directions for Use:

Store container tightly closed. Read directions before use.
  1. Surface should be clean, dry and free from dirt. For best results, lightly roughen the surface before use.
  2. Puncture the tube seal using a pointed metal tool such as pliers or screwdriver. Ideal application temperature range is 10 to 32°C. However, fully cured adhesive can withstand temperatures from -40 to 82°C intermittently.
  3. Apply directly to surfaces to be bonded or repaired. Be careful not to squeeze the tube too tightly. Adhesive will come slowly through the precision tip. If you require faster application, do not use the precision tip. Squeezing the tube too hard may result in the tube end crimp opening. If this happens, re-fold the tube end crimp tightly.
  4. Allow 24 hours to cure. Depending on the materials and temperature, maximum strength may not be reached for 48-72 hours.
  5. For future easy cap removal, apply a thin layer of petroleum jelly to the tube thread before replacing the cap.
  6. Ensure the cap hole is sealed using the included cap-seal, after removing the precision tip.
  7. Clean uncured adhesive with acetone or citrus-based solvents. Cured adhesive may be removed by cutting or scraping.